Michi M8 Monoblock Power Amplifier by Rotel



Pin It
  • AUTOMATED ORDERING UNAVAILABLE
    CALL TOLL FREE 855.991.8181 FOR PURCHASE ASSISTANCE

    The Michi M8 Monoblock Amplifier no-compromise Class AB amplifier delivers 1,080 watts into 8 ohms and an astounding 1,800 watts into 4 ohm loads.  The design architecture ensures a smooth, accurate and relaxed delivery of the audio to even the most demanding loudspeakers while maintaining critical energy, rhythm and timing.

    The stunning control and authoritative power of the Michi M8 Monoblock Amplifier is the result of a perfect balance of science meets art delivering 1,080 watts of Class AB power into 8 ohms and an astounding 1,800 watts to the most demanding 4 ohm loudspeakers. The M8 is powered by a pair of custom engineered, low noise, in-house manufactured toroidal transformers supported by 4 British patented slit foil, high efficiency, low ESR bulk storage capacitors for impactful bass with exceptional control under extreme loading conditions.

    To achieve accuracy and its unsurpassed performance, the M8 is equipped with an array of 32 high current output transistors thus reducing the load on individual components and maintaining the crucial energy, rhythm and timing throughout the amplification stages. Musical expression and detailed refinement were further accomplished through acoustic tuning of all critical components and a balanced circuit design.

    A high resolution display adorns the front panel supporting a peak power meter or spectrum analyzer. With XLR and RCA inputs, 2 sets of custom Michi speaker binding posts, remote control and fully featured RS232 and Ethernet connections the M8 provides ultimate installation flexibility. Power amplification at its best in the most elegant of industrial designs.

  • FEATURES:
    • Balanced XLR inputs
    • Class AB linear power amplifier
    • 1,080 watts of robust power @ 8 ohms
    • 1,800 watts @ 4 ohms
    • Dual custom engineered toroidal transformers
    • BHC patented bulk storage capacitors totalling 188,000uF
    • Dimmable front panel TFT high res display
    • Dual 5-way custom Michi designed binding posts
    • IP and RS232 2-way communication for control system integration
  • SPECIFICATIONS: 
    DIMENSIONS (W × H × D)
    485 × 238 × 465mm
    19" × 9.375" × 18.25"
     
    FRONT PANEL HEIGHT
    220mm (8.625")
     
    POWER REQUIREMENTS
    120V, 60Hz
     
    POWER CONSUMPTION
    1200W
     
    STANDBY POWER CONSUMPTION
    Normal: <0.5W
    Network Wakeup: <2W
     
    NET WEIGHT
    59.1kg (130.3lbs.)
     
    BTU RATING (4Ω, 1/8th power)
    3200 BTU/h

    CONTINUOUS POWER OUTPUT
    1080W/Ch (8Ω)
    1800W/Ch (4Ω)
     
    TOTAL HARMONIC DISTORTION (THD)
    <0.018%
     
    FREQUENCY RESPONSE
    20Hz - 20kHz (+0dB, -0.15dB)
    10Hz - 100kHz (+0dB, -0.5dB)
     
    S/N RATIO(IHF "A" Weighted)
    120dB
      
    GAIN
    Unbalanced (RCA): 34dB
    Balanced (XLR): 30dB

    INTERMODULATION DISTORTION (60Hz:7kHz, 4:1)
    <0.03%
     
    DAMPING FACTOR
    200
     
    SPEAKER IMPEDANCE
    4Ω minimum
     
    INPUT SENSITIVITY
    Unbalanced (RCA): 1.85V
    Balanced (XLR): 3V
     
    INPUT IMPEDANCE
    Unbalanced (RCA): 12.5kΩ
    Balanced (XLR): 100kΩ

Related Items