Luxman CL-1000 Control Amplifier



Pin It

Next → ← Previous

AUTOMATED ORDERING UNAVAILABLE
CALL 855.991.8181 FOR PURCHASE ASSISTANCE

Successor to the C-1000, the CL-1000 pairs beautifully with the MQ-300 vacuum tube stereo power amplifier. It embodies the best with a major step forward in sonic clarity: the transformer-assisted volume control we call LECUTA (Luxman Electronically Controlled Ultimate Transformer Attenuator). In addition, super permalloy core output transformers contribute to a vivid sound stage.

The heart of any preamp is the volume control. This key circuit element can cause left/right channel imbalances and introduce subtle but tangible distortions at low volume. The front panel volume triggers 34 relays located outside the signal path. The relays activate 34 taps on matching left and right transformers. These taps adjust the volume in carefully calibrated steps. Because transformer cores can influence sound quality, we selected FINEMET® core material. This has a unique nanocrystal structure for high saturation flux density, high relative permeability and low core loss.

The front panel uses the latest precision machining to superpose three thick aluminum layers into one massive, anti-resonant assembly. The aluminum provides a graceful counterpoint to the cabinet, covered in natural walnut with a rosewood gloss finish.

External vibration is the enemy of vacuum tubes. Engineers built a rigid box chassis reinforced by internal partitions. Brackets which hold circuit boards are isolated from the main chassis by special rubber dampers.

The RCA input/output terminals consist of an alloy that combines the conductivity of copper with the durability of brass. We also matched the massive, anti-resonant chassis to iron isolator feet. These diffuse shelf-borne vibration.

LUXMAN adopted two-stage P-K NF amplification. The balanced inputs incorporate super permalloy core transformers. The attenuator driver amplifier achieves 6 dB of gain thanks to a JJ Electronic E88CC dual triode vacuum tube. We selected the E88CC for superb reliability, extremely low noise, attractive dynamics and a densely detailed midrange. After LECUTA volume adjustment, the output stage incorporates a second E88CC and independent left/right super permalloy output transformers.

The CL-1000 accommodates both MM and MC cartridges with an audiophile phono preamplifier. Six-position switches on the rear panel enable you to optimize impedance and capacitance.

We chose independent left and right output transformers with high-permeability super permalloy cores. And we applied the same grade of transformers to the independent left and right balanced inputs.

We incorporated a highly stable, extremely potent power supply. A large power transformer plus independent left and right channel filter capacitors provide immediate power. You get instant dynamic response, excellent left/right separation and high reliability.

The CL-1000 oscillates and demagnetizes the transformer cores every time you turn the power on. For an even higher degree of sonic purity, you can perform manual demagnetization using the Articulator switch.

We use the LUXMAN oil-impregnated capacitors originally developed for our MQ-300 vacuum tube amplifier. These help deliver rich, satisfying music reproduction. Our original low-profile electrolytic capacitors can handle high current despite their size.

SPECIFICATIONS:
Input sensitivity
LINE / BAL.LINE 180 mV/1 V output, 1 kHz, load 50 kΩ
EXT-IN (PHONO)
 MM 100 kΩ (38 dB) 2.2 mV/1 V output, 1 kHz, load 50 kΩ
 MM 50 kΩ (38 dB) 2.2 mV/1 V output, 1 kHz, load 50 kΩ
 MM 33 kΩ (38 dB) 2.2 mV/1 V output, 1 kHz, load 50 kΩ
 MC-H 1 kΩ (57 dB) 0.26 mV/1 V output, 1 kHz, load 50 kΩ
 MC-M 40 Ω (57 dB) 0.26 mV/1 V output, 1 kHz, load 50 kΩ
 MC-L 10 Ω (66 dB) 87 μV/1 V output, 1 kHz, load 50 kΩ
Input impedance
LINE 90 kΩ/1 kHz
BAL.LINE 70 kΩ/1 kHz
EXT-IN (PHONO)
 MM 100 kΩ, 50 kΩ, 33 kΩ
 MC 1 kΩ, 40 Ω, 10 Ω
Output impedance LINE / BAL.LINE : 1 kΩ/1 kHz
Freq. response
LINE / BAL.LINE +0.3, -0 dB/1 V output, 20 Hz to 20 kHz, load 50 kΩ
EXT-IN (PHONO) ±0.3 dB/1 V output, 20 Hz to 20 kHz, load 50 kΩ
Total harmonic distortion
LINE / BAL.LINE 0.016 %/1 V output, 1 kHz, load 50 kΩ
EXT-IN (PHONO)
 MM 0.3 %/1 V output, 1 kHz, load 50 kΩ
 MC (H, M) 0.3 %/1 V output, 1 kHz, load 50 kΩ
 MC (L) 0.5 %/1 V output, 1 kHz, load 50 kΩ
S/N ratio
LINE / BAL.LINE 120 dB (IHF-A)/distortion 1%, 1 kHz, load 50 kΩ
EXT-IN (PHONO)
 MM 108 dB (IHF-A)/distortion 1%, 1 kHz, load 50 kΩ
 MC(H, M) 92 dB (IHF-A)/distortion 1%, 1 kHz, load 50 kΩ
 MC(L) 83 dB (IHF-A)/distortion 1%, 1 kHz, load 50 kΩ
Tone control
Max. change ±8 dB
Bass 150 Hz, 300 Hz, 600 Hz
Treble 1.5 kHz, 3 kHz, 6 kHz
Low cut 30 Hz (-6 dB/oct)
Vacuum tube E88CC x 6
Power supply 230V~(50 Hz)/115V~(60 Hz)
Power 52W
Dimensions 460(W) x 166(H) x 454(D) mm
(including 13.5 mm front knob and 14.5 mm rear terminals)
Weight 24.4kg

Related Items