Rega RX3 Floorstanding Loudspeaker - PAIR



Pin It
The Rega RX-THREE loudspeaker system delivers balance, detail and dynamics thanks to a unique  handmade set of three Rega designed drivers and crossover. The newly developed DX-125 bass mid-range driver (using a doped paper cone) is at the heart of the RX range and combines perfectly with the Rega ZRR high frequency and RR125.8 bass unit. These custom units are mounted in a newly designed cabinet enclosure constructed from 18mm MDF and covered in a choice of three, beautiful, real wood veneers. The RX-THREE will  integrate perfectly into any home and deliver exceptional performance and musicality with a smooth and accurate bass response.

The RX-THREE’s are a compact floorstanding loudspeaker with a dedicated side firing bass driver. Bass response and imaging can be tuned by adjusting the distance of the speaker from the rear and side walls. As with all loudspeakers, this will be dependant on the size of room, flooring and furnishings, therefore some simple experiments trying different distances will help optimise the performance to your surroundings. If the bass becomes ‘boomy’, you can position the side firing speakers inwards to suppress any unwanted bass responses.
  • System 2.5 way
  • Cabinet Construction 18mm MDF Real wood veneer 
  • Cabinet design Band pass enclosure
  • Dimensions (cm) H x W x D  80 x 16 x 25.8
  • Weight (each) 11.5 Kg
  • Reflex Port Front ported
  • Impedance Nominal 6 ohms
  • Sensitivity 89 dB
  • Power handling 100w per channel*
  • High Frequency unit Rega ZRR
  • Mid/bass driver (doped cone) Rega DX-125
  • Side bass driver Rega RR125.8

*Power handling figures are quoted as a guide. Amplification between 
30w and 500w can be safely used depending on the quality of amplification.

To ensure adequate clearance and prevent damage to the front facia, the grille magnets must locate directly onto the drive unit fixing bolts.

Related Items