Monitor Audio Silver 300 Floorstanding Loudspeakers - PAIR

Pin It
  • The Monitor Audio Silver 300 floorstander retains the familiar award-winning configuration of its predecessor, with several crucial improvements to drivers. The full three-way design delivers class-leading mid-range, while a pair of long-throw 6½-inch bass drivers work together to produce incredible power from the tall, but slim cabinet design, making it the perfect choice for serious audiophile and AV installations.

    The three-way configuration allows each driver to be optimised to do a better job over a narrower frequency band; the only real way to deliver elevated performance in every respect. Superlatively natural mid-range comes courtesy of a dedicated 4-inch driver, specially designed with ‘under hung’ voice coil and motor system. This technique ensures the voice coil always remains in the magnetic gap under all conditions for demonstrably lower distortion than usually found at this level – an advance which can be immediately heard.

    Coupled with higher overall impedance and better overall system damping, the cabinet can be placed close to a wall. However, this is a serious audiophile speaker, capable of delivering seismic levels of bass extension. For optimum performance, a distance of just 12 inches (30 cm) is needed between the speaker and wall, allowing the system to breathe and perform optimally. High overall sensitivity makes this new Silver 300 easy to drive with a modest, high-quality amplifier delivering precise, dynamic music or film to fill a medium to large room.

  • Three-way, four-driver configuration (electrically and acoustically) allows the drivers to be optimized to deliver higher efficiency and lower distortion from a cabinet of this size

    New 25 mm C-CAM, (Ceramic-Coated Aluminum/Magnesium) featuring vented Neo magnet system has been optimized for lower distortion and cleaner-sounding highs

    Specially developed 4-inch mid-range driver with ‘under hung’ voice coil and motor system so the voice coil is always in the magnetic gap, ensuring very low distortion

    Dual 6-inch bass drivers with concave ‘dished’ C-CAM cone profile means better damping and improved mid-range clarity

    RST Cone profile for improved diaphragm rigidity and lower distortion

    Unique-build ring/voice coil-cone coupling mechanism (DCF) optimized to reduce high-frequency cone break-up and increasing the critical voice coil circumferential rigidity

    Cast polymer driver chassis design results in improved rigidity and damping characteristics

    HiVe II port technology for improved transient response and tighter bass, due to smoother airflow

    Pureflow silver-plated OFC copper internal cabling gives the highest quality transfer through the signal chain

    High-quality crossovers with premium grade, bespoke polypropylene film capacitors, air-core and low-loss laminated steel-core inductors ensure maximum signal transfer

    Rigid 20 mm MDF construction utilizing scientifically-optimized cabinet bracing

    Single bolt-through driver technology provides increased bracing strength, rigidity and driver/baffle de-coupling

    Ultra-low profile grilles featuring invisible magnetic grille fixings for clean visual styling when fitted

    Ultra-low profile grilles featuring invisible magnetic grille fixings for clean visual styling when fitted

    Terminal panel located at floor level for easy termination and neat cable access

    Out-rigger feet (spiked, or rubber for hard flooring) provide attractive appearance while taking up less floor space

    Selected, premium-quality wood veneers, high-gloss lacquer and contemporary Satin White finishes.

  • System Format


    Frequency Response (-6 dB)

    32 Hz – 35 kHz

    Sensitivity (1W@1M)

    90 dB

    Nominal Impedance

    8 ohms

    Minimum Impedance

    3.5 ohms @ 146 Hz

    Maximum SPL

    116 dBA (pair)

    Power Handling (RMS)

    200 W

    Recommended Amplifier Requirements

    80 – 200 W

    Bass Alignment

    Bass reflex. HiVe II port system

    Crossover Frequency

    LF/MF: 570 Hz

    MF/HF: 3.5 kHz

    Drive Unit Complement

    2 x 6-inch RST bass driver 1 x 4-inch RST mid-range driver

    1 x 1-inch (25 mm) Gold Dome C-CAM tweeter

    Cabinet Dimensions (excluding grille and terminals)

    1000 x 185 x 300 mm

    (393/8 x 75/16 x 1113/16-inch)

    External Dimensions (including grille and terminals)

    1000 x 185 x 329 mm

    (393/8 x 75/16 x 1215/16-inch)

    External Dimensions (including out-rigger plates, feet and spikes)

    1034 x 252 x 367 mm

    (4011/16 x 915/16 x 147/16-inch)

    Weight (each)

    20 kg

Related Items