Dynaudio Contour 30 Floorstanding Loudspeaker - PAIR

Pin It
  • Contour 30 step it up a notch from the 20. Of course, it still treads the same path – one of honesty, transparency, and sheer entertainment, but it puts it all in a bigger package.

    We’ve endowed Contour 30 with two 18cm MSP drivers, as well as doubling up the rear ports. What makes our drivers so special? Variable thickness across the diaphragm, for one thing.

    It’s made from MSP – a material we developed ourselves, and have been using in our drivers since 1985. MSP gives exactly the right combination of stiffness and damping – which you’ll hear as exactly the right combination of power, finesse, and control. Just what a Contour speaker should have. But, we’ve taken it further: we’ve varied the diaphragm’s thickness across its surface, which gives even greater control over its sound.

    And aluminium voice-coils, for another. We can make them extremely light – but also bigger than the old-style copper units you’ll find elsewhere. Lighter weight means larger diameters, which means we can use more windings, which means we have more control over the cone movement. And that translate to more control over the sound reproduction – especially at high frequencies and high volumes.

    We also included the ultra-pure, ultra-clear Esotar2 fabric soft-dome tweeter.

    And because we’re irrepressible tinkerers, we’ve given the inside a makeover, too. As with the Contour 20 and the Contour 60, the Contour 30 has new baskets to hold the drivers themselves, as well as a new crossover and new wiring. We listened to our old Contours for months and decided we wanted the crossover to serve up even better bass. So, now you can go louder and lower.

    Making a Contour without its signature baffle would be all-near impossible. But, there’s always room for improvement. The new baffle is made from a solid piece of aluminium and set into the cabinet. Its chamfer is included in the driver’s basket – which not only looks great, but also reduces unwanted high-frequency diffraction effects for clearer treble, and provides a solid foundation for the drivers to do their work. A solid foundation means improved high-volume performance at low frequencies.

    And although we might have changed the cabinet’s shape, the new design tips a respectful nod to older Contours. Look at it from the top; you’ll see the old baffle design in its shape. But, it isn’t just for show – the new shape marries those aesthetics with cutting-edge acoustic physics. Its multilayered construction is extremely well-damped, which means the Contour’s sound goes exactly where it’s supposed to: forwards.

    We’ve redesigned the internal wiring and crossover, too You won’t see what we’ve done, but you’ll hear the effect: amazingly clear sound, even off to the sides of the speaker.

    The four standard priced finishes are: Gloss White, Gloss Black, Walnut (satin) - $7500 per pair.

    Two special order finishes are also available: Grey Oak Lacquer and Rosewood Lacquer - $8625 per pair

  • Features:

    The world renown Esotar 2: The all-new Contour uses the ultra-pure, ultra-clear Esotar2 fabric soft-dome tweeter. It’s Dynaudio’s finest tweeter and commonly regarded as one of the world’s best-ever drivers.

    All-new drivers: Brand-new one-piece extended-excursion woofers packed with new technology. You won’t find them on any other speaker. Anywhere.

    Redesigned crossover: We’ve redesigned the entire crossover, including using ultra high-quality Mundorf capacitors and a brand-new wiring configuration for even better bass.

    Curved edges with sonic purpose: Brand-new elegant and sleek looking cabinet that provides a solid foundation for the drivers to do their job. 

    Driver: New 18cm extended-excursion loudspeaker drivers for improved bass reproduction

    Voice-coil: Large diameter, aluminium voice-coils with 24% increased winding height

    Spider: New asymmetric spider for increased system symmetry

    Tweeter: World renown 28mm Esotar2 tweeter for ultra clear high-frequencies

    Crossover: High-quality Mundorf capacitors and brand-new wiring configuration

    Cabinet: MDF cabinet with curved edges for a solid construction

  • Specifications: 

    Sensitivity:                     87dB (2.83V/ 1m)

    IEC power handling:      300 Watts

    Nominal impedance:      4 ohms

    Box Principle:                Rear ported bass reflex

    Frequency response:      32Hz – 23kHz (-3dB)

    Crossover slope:            2 1/2 Way

    Crossover Frequency:    (300)/2200 Hz

    Crossover slope:            2nd order

    Woofer:                          18cm MSP cone

    Tweeter:                         28mm Soft Dome

    Weight:                          34.4kg

    Dimensions (W x H x D): 215 x 1170 x 360mm

Related Items