Monitor Audio Silver C350 Center Channel Speaker

Pin It
  • The Silver C350 centre speaker from Monitor Audio is designed for serious home theatre installations, where performance is the most critical factor. The three-way, four-driver configuration utilises the same driver complement as the Silver 300 although, in this case, the bass drivers have been designed and tuned to work in a sealed box for easier placement in a cabinet or close to a boundary/wall. For the perfect A/V enjoyment, you can’t better the Silver C350 for crisp, articulate dialogue. Don’t miss a word.

    What makes the Silver C350 so special is the vertical orientation of the mid and tweeter axis which delivers the same directivity as the other speakers in the system. A high percentage of the total sound balance in a theatre system is delivered to the centre channel (typically 60%), so this crucial speaker should not to be overlooked when specifying a high-performance, no-compromise theatre system for the home.

    The Silver C350 makes an ideal partner for the Silver 100, Silver 300 and Silver 500 models, being carefully matched to their sonic characteristics.

  • Three-way, four-driver configuration (electrically and acoustically) allows drivers to be optimized to deliver better higher efficiency and lower distortion

    Sealed cabinet for accurate performance when installed in an A/V cabinet, restricted voids or close to a wall

    New 25 mm C-CAM, (Ceramic-Coated Aluminum/Magnesium) featuring vented Neo magnet system carefully optimized for lower distortion and cleaner-sounding highs

    Specially developed 4-inch mid-range driver with ‘under hung’ voice coil and motor system to ensure the voice coil is always in the magnetic gap guaranteeing very low distortion

    Dual 6-inch bass drivers with ‘dished’ C-CAM cone profile for better damping and improved mid-range clarity

    RST Cone profile for improved diaphragm rigidity and lower distortion

    Unique-build ring/voice coil-cone coupling mechanism (DCF) tuned to reduce high-frequency cone break-up and increasing the critical voice coil circumferential rigidity

    Cast polymer driver chassis design for improved rigidity and damping characteristics

    Pureflow silver-plated OFC copper internal cabling means the highest-quality transfer

    High-quality crossovers with premium-grade bespoke polypropylene film capacitors, air-core and low-loss laminated steel-core inductors mean maximum signal transfer

    Rigid 20 mm MDF construction utilizing scientifically optimized cabinet bracing

    Single bolt-through driver technology provides increased bracing strength, rigidity and driver/baffle de-coupling

    Ultra-low profile grilles featuring invisible magnetic grille fixings for clean visual styling when fitted

    Bespoke, high quality bi-wire terminals

    Selected, premium-quality wood veneers, high-gloss lacquer and contemporary Satin White finishes.

  • System Format


    Frequency Response (-6 dB)

    40 Hz – 35 kHz

    Sensitivity (1W@1M)

    90 dB

    Nominal Impedance

    8 ohms

    Minimum Impedance

    3.2 ohms @ 176 Hz

    Maximum SPL

    113 dBA

    Power Handling (RMS)

    200 W

    Recommended Amplifier Requirements

    80 – 200 W

    Bass Alignment

    Sealed cabinet

    Crossover Frequency

    LF/MF: 830 Hz

    MF/HF: 3.2 kHz

    Drive Unit Complement

    2 x 6” RST bass/mid driver

    1 x 4” RST midrange driver

    1 x 1” (25 mm) Gold Dome C-CAM tweeter

    Cabinet Dimensions (excluding grille and terminals)

    235 x 560 x 240 mm

    (9 1/4” x 22 1/16” x 9 7/16”)

    External Dimensions (including grille and terminals)

    235 x 560 x 270 mm

    (9 1/4” x 22 1/16” x 10 5/8”)

    External Dimensions (including out-rigger plates, feet and spikes)


    Weight (each)

    14.9 kg

Related Items