Focal Shape 65 2-way Powered Studio Monitor - EACH

Pin It

Next → ← Previous


    Shape 65 monitors combine an ingenuous design and numerous settings optimized for the acoustics of small listening rooms. The bass register is articulated and controlled. The lower mid-range and mid-range benefit from extreme neutrality, and without any masking effects. Finally, the new tweeter is what’s at the source of the very high definition. It efficiently reveals any hissing, and it’s also very precise in the very high end.

    Flax Sandwich Cone

    Flax cones are oriented towards acoustic performance, high-tech and are characterized by their natural sound, with low coloration, their richness of reproduction in the midrange register and their tighter bass.

    The Unique Qualities Of Flax

    Flax cones are made of high-quality flax fibers core enclosed by two thin layers of glass fiber. They satisfy the key criteria of a high performance diaphragm: high internal damping, high velocity of sound and high flexural rigidity.


    Flax is twice as light as fiberglass, because the fiber is hollow. It also has very low elasticity which makes it ideal to increase the flexural rigidity of a sandwich structure. Flax fiber has an excellent internal damping of the same order of magnitude as the glass or Kevlar fibers or aluminum. 

    Stabilizing The Magnetic Field

    The magnetic field is not stable because it is modulated by three factors:

    • The movement of the voice coil (Lenz's law),
    • The current passing through it (Foucault current),
    • The frequency.

    Consequently, the voice coil, and all the moving part including the cone, is in the magnetic field which becomes too variable, and this leads to loss of precision.

    Neutral Inductance Circuit Technology

    The solution, NIC technology, lies in a Faraday ring whose dimensions, materials and positioning were optimized to make the magnetic field no longer affected by the position of the voice coil, by the amperage or the frequency of the current passing through it.

    The Obsession With The Midrange

    The midrange register is no doubt the most complicated to control in a sound system. There must be a smooth transition with the bass. It must be tuned to the tweeter in terms of dispersion and acceleration. This determines the homogeneity of the timbre and spatialization.

    Focal has been working on the "break up" (the frequency at which the cone becomes deformed, leading to distortion) of our "W" cones and on drastically reducing the resonance of the tweeter with the IAL 2.

    Tuned Mass Damper

    The solutions already known for increasing the damping properties of the suspension all result in an increase of the mass which consequently alters definition. The answer came from a technology used in earthquake-resistant skyscrapers and which is also used for the suspension on racing cars! This technology is called a "Tuned Mass Damper": an additional mass oscillate in opposition to the resonance frequency to control it.

    Applied to the speaker driver, the solution consists in simply two tubular rings on the suspension whose dimensions and position have been judiciously determined. They form our Tuned Mass Damper (TMD) and they stabilize the dynamic behavior of the surround according to resonance, thus avoiding deformation of the cone without afflicting the dynamics.

    • Tweeter with very low directivity for a flexible listening position
    • Designed without a port, but with a double passive radiator, allowing it to be placed near a wall.
    • Numerous settings for optimal integration
    • Flax sandwich cone: controlled and well defined bass, natural and detailed lower mid-range and upper mid-range ranges
    • Mounting mechanisms present on the back and underneath the loudspeaker: for installing on a table stand, a microphone stand, the ceiling or a wall.
    • Frequency response (+/-3dB) : 40Hz - 35kHz
    • Maximum SPL (musical signal) : 109dB SPL (peak @ 1m)
    • Type XLR : balanced 10kOhms
    • Inputs/Impedance Connectors RCA : unbalanced 10kOhms with sensitivity compensation
    • Midrange and low frequency amplifier : 80W, class AB
    • High frequency amplifier : 25W, class AB
    • Standby on : After approximately 30 minutes with no Signal Standby off : Signal detection > 3 mV
    • Voltages : 220-240V (T1AL / 250V fuse) or 100-120V (T2AL / 250V fuse)
    • Connection : IEC plug and detachable power cord
    • High pass filter : Adjustable Full range 45/60/90Hz
    • Bass (0 - 250Hz) : Adjustable, +/-6dB
    • Midrange/bass (160Hz, Q=1) : Adjustable, +/-3dB
    • High (4.5 - 35kHz) : Adjustable, +/-3dB
    • Power On/Power Off O: n/off switch on rear panel
    • Standby consumption : < 0.5W
    • Displays and controls : LED for power on/off and standby
    • Woofer : 6.5" Flax Cone
    • Tweeter : 1"  'M' profile Aluminum-Magnesium
    • Construction : 0.6" (15mm) MDF
    • Finish : Vinyl, real walnut and black painting
    • Dimensions with four rubber feet(HxWxD) : 14 x 8.6 x 11.2"

Related Items