A tuner's delight! The FM1 features patented analog FM receiver architecture, delivering superior RF performance and rejecting interference with digital IF processing. The FM1 includes advanced seek algorithms, adjustable soft mute, stereo blend, auto-calibrated digital tuning, and FM stereo processing. Digital processing allows precise pilot rejection, selectivity, and unmatched audio quality. The advanced digital IF section operates at 24-bits and 48Ks/s data rate. Run the digital output into your favorite Bel Canto DAC or choose the FM1's analog outputs derived from our High Dynamic Range Bel Canto DAC architecture. 10 presets 24-bit 48kHz digital outputs Balanced/single ended analog output 24-bit 192kHz dual-differential DAC 8 character alphanumeric display with RDS/RDBS External power supply Remote included Made in the USA This product can only be shipped to USA addresses We represent the Southwest USA. If you are outside of Arizona and do not have local Bel Canto representation, please email or call us at 480.991.8181 for professional purchase assistance.
The DAC2.5 Dual-Differential DAC Control Center is also designed to integrate all your source components--analog and digital--with five 24/192 digital inputs, an analog input, and a 24/96 USB input. A ¼" front-panel headphone jack driven by its own DAC/Amplifier combo that optimizes both headphone and main-out listening. The DAC2.5 outputs a very healthy 122db dynamic range offering excellent resolution, flexibility and control with a new, intuitive, easy-to-read display and user interface. The advanced internal LNS power supply is powered via a standard IEC input. 24-bit 192kHz 122dB dynamic range dual-differential DAC, Balanced I/O, 5 digital inputs UltraClock, LNS internal power supply standard IEC connection, Analog input 24-bit 96kHz USB input, RS 232 port 1/4 inch front panal headphone output with independent DAC, Digital volume control 8-character alphanumeric display Remote included Made in the USA This product can only be shipped to USA addresses We represent the Southwest USA. If you are outside of Arizona and do not have local Bel Canto representation, please email or call us at 480.991.8181 for professional purchase assistance.
We're expanding our well-known amplifier line to include the e.One S125 and REF150S. They feature 117dB dynamic range and power doubling into 4 ohm speakers. The custom input stage improves drive to the amplifier for lower noise and less distortion. Fully-regulated low-heat, ultra-efficient switch-mode power supplies and class-A analog output control circuitry make possible Bel Canto's eco-friendly compact designs. Fully-balanced stereo amplifier 65/125W Made in the USA This product can only be shipped to USA addresses We represent the Southwest USA. If you are outside of Arizona and do not have local Bel Canto representation, please email or call us at 480.991.8181 for professional purchase assistance.
The higher spec REF150S is about more than a few extra watts. Like all REF series amps they're fitted with custom power supply rectification and filters that substantially increase the power supply's energy storage. They're manufactured with carefully selected high-speed, low-noise rectifiers, high-voltage film filter capacitors and high energy storage capacity. What this means for you is lower noise and reduced sensitivity to power line effects. Balanced stereo amplifier 75/150W Custom input stage Low noise power supply Made in the USA This product can only be shipped to USA addresses We represent the Southwest USA. If you are outside of Arizona and do not have local Bel Canto representation, please email or call us at 480.991.8181 for professional purchase assistance.
Our most affordable entry level AC power cord is perfect for any source equipment, digital products and small to medium power amplifiers that uses the more standard three prong detachable IEC power connector found on most high-end equipment. PS AC power cables are unequaled from a construction quality and performance standpoint. The PS Jewel allows anyone to replace their stock power cables and make an immediate noticeable improvement. Choosing to upgrade your power cables can make a significant improvement to your equipment's performance. Affordable Stock-Cord-Replacement
High-end AC receptacle that is the starting point for any properly built AC foundation. By installing the Power Port AC receptacle in your AV room, you gain an immediate improvement in performance over a standard wall receptacle. The Power Port is a custom built, isolated ground, 15 to 20 amp receptacle that will insure a life-long level of excellence. The Power Port exceeds hospital grade for grip strength, contact resistance and current delivery. Easy to install in your wall, this is one component you need in your listening room. 15 coats of polished nickel over high-purity brass, with the "grip of Mickey Mantle" and polished nickel plated hardware, this a must have in your system. AV Grade Receptacle
The Atlantis Floor Protectors enable the use of isolation points on hardwood and tile floors. These are an effective solution in maintaining isolation while eliminating damage your floor finish. A quality and attractive product from Atlantis.
Machined Aircraft Alumium with center dimple to accept the cone point. Approximately 2 inches in diameter. Raw Aluminum Silver Set of 4
Light is George Cardas' newest design, featuring developments that are a result of his many years as an audio cable designer. Light interconnect is neutral and revealing. A serious audiophile cable, Light provides high end extension, refined lows, and a refined sound stage. Light works well at any length, including extra long runs. New Cardas product
Custom sizes available
The anti-vibration properties of Ebony wood offers increased performance by cancellation of induced 60Hz resonance. Easy one screw installation. Sold individually
The anti-vibration properties of Myrtle wood offers increased performance by cancellation of induced 60Hz resonance. Easy two screw installation. Sold individually
This all new, George Cardas designed and manufactured Female XLR features Rhodium contact surfaces. Pure, non- magnetic, eutectic billet Brass, Gold and Rhodium over Silver platings. These connectors have a unique end shielding technique that blocks RF and Clock signals. Sold Individually - Female Connector
This all new, George Cardas designed and manufactured Male XLR features Rhodium contact surfaces. Pure, non- magnetic, eutectic billet Brass, Gold and Rhodium over Silver platings. These connectors have a unique end shielding technique that blocks RF and Clock signals. Sold Individually - Male Connector
Dedicated Audio
7441 East Butherus Drive . Suite # 600 . Scottsdale . Arizona . 85260 . USA Appointments Required
Telephone Sales and Support: Monday - Friday 10:00am - 5:00pm PST
Closed on Holidays
Automated Online Ordering: 24 hours per day
Scottsdale and Phoenix Area Hi-Fi Customers by Appointment
* FREE GROUND SHIPPING - minimum order $100.00 - USA Lower 48 Ground Service - HI, AK and International shipping amounts will require additional shipping fees and will be manually adjusted as required during order processing. Some exclusions apply.
Copyright
The entire content included in this site, including but not limited to text, graphics or code is copyrighted as a collective work under the United States and other copyright laws, and is the property of Dedicated Audio LLC. The collective work includes works that are licensed to Dedicated Audio LLC. ALL RIGHTS RESERVED. Any use, including but not limited to the reproduction, distribution, display or transmission of the content of this site is strictly prohibited, unless authorized by Dedicated Audio LLC.
Digital Millennium Copyright Act (DMCA) Trademarks
All trademarks, service marks and trade names of Dedicated Audio LLC used in the site are trademarks or registered trademarks of Dedicated Audio LLC
Prices and availability are subject to change without notice.
We reserve the right to correct automated processing anomalies.
We reserve the right to refuse service.
