Cardas 9 inch Preamp OUT / Amp IN Jumpers. Replace your inferior "U" shaped jumpers on the rear of your integrated amplifiers and receivers with this quality product from Cardas Audio. Constructed of 2x21.5 AWG Cardas Golden Ratio Shielded cabling to the fantastic Rhodium plated Cardas GRCM male RCA.
Kit contains (2) 9" RCA/RCA Jumpers
|
|
Cardas Audio and Dedicated Audio have put heads together to create an "enhanced" version of our already outstanding speaker jumper. Constructed of 9AWG "Golden Ratio," Constant Q, Crossfield, Pure Copper, Litz, Teflon dielectric conductors united to the CCMS Mike Colver milled billet Copper with Rhodium over Silver plated post spades. Also can be custom built hybrid spade to banana or all banana (usually about a week) for an additional fee.
Set of (4) - 6" long
Our Top Selling Premium Jumper
note: jumpers are non-returnable if bent, scared or previously installed - please contact us for clearification.
|
DEDICATED AUDIO "BEST BUY"
Cardas multi strand "Golden Ratio" 11.5AWG conductor mated with the Cardas 6mm-1/4" GRS R Copper, Rhodium over Silver stamped spade.
Set of (4) - 6" long
1/4" Spade to 1/4" Spade
note: jumpers are non-returnable if bent, scared or previously installed - please contact us for clearification.
|
Cardas multi strand "Golden Reference" 11.5AWG conductor mated with the Cardas 9mm - 5/16" GRS R9 Copper, Rhodium over Silver stamped spade.
Set of (4) - 6" long
Oversized 5/16"- 9mm Spade to Spade
note: jumpers are non-returnable if bent, scared or previously installed - please contact us for clearification.
|
Cardas multi strand "Golden Ratio" 11.5AWG conductor mated with the Cardas CABE non-magnetic, eutectie Brass, nickel plate, Banana plug.
Set of (4) - 6" long
Banana to Banana
note: jumpers are non-returnable if bent, scared or previously installed - please contact us for clearification.
|
Cardas multi strand "Golden Ratio" 11.5AWG conductor mated with the Cardas GRS R Copper, Rhodium over Silver stamped spade on one end and the Cardas CABE eutectic brass, nickel plate banana on the other end.
Set of (4) - 6" long
Spade to Banana Hybrid
note: jumpers are non-returnable if bent, scared or previously installed - please contact us for clearification.
|
Center Channel Bi-wire Jumpers - 6" - Spade/Spade
Cardas multi strand "Golden Ratio" 11.5AWG conductor mated with the Cardas 6mm -1/4" GRS R Copper, Rhodium over Silver stamped spade.
Set of (2)
1/4" Spade to 1/4" Spade
note: jumpers are non-returnable if bent, scared or previously installed - please contact us for clearification.
|
The 6" Audience Au24 Loudspeaker Bi-Wire Jumpers are built exactly as the renouned Au24.
Fantastic
|
The Walker Audio Jumpers are constructed of (8) high purity Solid Silver 1/4" Spades and (4) 6" high purity Solid Silver Conductors
Typical Walker Quality
|
Cardas CLJP Adjustable 6mm/1/4" bi-wire Jumper plates
note: jumper plates are non-returnable if bent, scared or previously installed - please contact us for clearification.
Copper - price per plate
|
Cardas CLJPR - Adjustable bi-wire 1/4" - 6mm Jumper plate.
note: jumper plates are non-returnable if bent, scared or previously installed - please contact us for clearification.
Copper, Rhodium over Silver plate - Price per plate
|
Walker Audio Reference HDLs use a new silver capacitor which we modify to our specifications and special parts developed for our Reference Phono Amp. All wiring and spades are ultra-pure silver. Subjected to a slow-immersion cryogenic process. Biwire systems require 2 pairs, triwire 3 pairs.
Sold in pairs matched to .05 percent.
Please Note: These are NOT Jumpers and should be used according to instructions
|
Walker Audio High Definition Links prevent RFI and very high frequency electronic noises (which are emitted from all electronics) from being transmitted to your speakers. They eliminate the unwanted noise from the signal path, while allowing the pure music signal to pass through unaffected. Biwire systems require 2 pairs, triwire 3 pairs.
Sold in pairs matched - Effective
Please Note: These are NOT Jumpers and should be used according to instructions
|
Replace your Magneplaner Tweeter Attenuator with quality jumpers from Cardas. 3"/ 15AWG Golden Reference Stranding with a positive fitting Rhodium over Silver plated maggie pins.
Fits ALL Maggies with tweeter attenuator and Bi-wire jumpers!
|
|
|
|
Maggie 20.1 owners generally require a 20" jumper kit rather than the 3.6 12" kit. Same as our standard 12" Maggie jumper kit but 20" long.
(4) 20" BUNDLED TWISTED PAIRS
In Stock
|
|
|
|
Cardas Audio GRQSS 1/4" Straight Stereo Phono Plug
Gold, Rhodium, Quarter inch, Straight, Stereo
Per Piece - requires solder
|
|
