For improved stability and damping, the Scout's chassis is made from 1 1/8" thick MDF bonded to a 12 gauge steel plate. The massive platter is composed of 1 3/8" acrylic and is mounted to an inverted bearing of Teflon and brass on a 60 case hardened shaft. The AC synchronous motor is contained in a separate steel housing and drives the platter via an Aries belt for smooth, quiet operation.

The JMW-9 tonearm is the perfect complement to the Scout, offering all of the advantages of a unipivot tonearm at a bargain price. The arm has a low friction bearing mounted on a solid stainless steel rod with a knurled ring to set VTA (Vertical Tracking Angle). As with the more expensive JMW-10" and JMW-12" arms, the tonearm wand assembly of the JMW-9 can be removed and replaced in seconds, allowing instant cartridge changes with multiple armwands. An RCA junction box allows any RCA-terminated interconnects to be used.

New JMW-9 Signature tonearm - The Signature version of the JMW-9 features a stainless steel bearing assembly, fine tracking force adjustment on the counterweight stem, Nordost Valhalla wiring in arm and junction box. It has 2.5 grams more effective mass for lighter cartridges of low compliance, a larger more solid design, variable pivot fluid damping, and mechanical anti-skate control.

The JMW-9 uses the same geometry and mounting as the Rega RB300 tonearm and can be dropped right into the Rega armhole with no modifications.

We recommend the Dynavector cartridges with the standard JMW9 arm and the Shelter Cartridges (available on our cartridge page) with the JMW Signature arm.